skip to Main Content
Should I Change A Breaker Without An Electrician?

Should I Change a Breaker Without an Electrician?

Live in Oklahoma and need help with your breaker? For a damaged breaker, googling “electrician OKC” might be the solution for you to be worry-free. You can let the professionals take care of it. Or maybe, you think you have the skills to solve this yourself.

Can you fix a breaker that stopped working and needs to be changed? Is there permanent damage and it needs to be replaced? Feel like this is something that you can get done yourself? Well, think again. Keep reading to see if this is something you can do or if you need the help of a professional to get the job done.

electrician OKC


Why Do Breakers Go Bad?

Breakers may stop functioning for a number of reasons. For example, during heavy storms or floods, the breaker may get water into the breaker and damage it permanently.

white breaker

In addition, breakers may sometimes be overused when homeowners flip the switch on and off, making it wear off too soon. You should really try to avoid this as much as you can, hence this is damage that can be avoided.

Additionally, another reason your breaker might stop functioning can be due to power strikes and lightning, damaging the circuit breakers. These are just a few examples of the ways that breakers may get damaged.

Can I Do It or Should I call an Electrician in OKC?

Either small or big, what ever size damage your breaker might have had, it’s always better to replace the breaker completely. Instead of trying to fix and replace all of the little bits that make the large component, it’s more cost effective to replace it entirely.

inside a breaker repair that an electrician OKC can do

Not only will you save plenty of money by doing this, but you will also get rid of the issue immediately, instead of you trying to figure out what is wrong with the breaker in the first place.

Many people do not want to replace it themselves since it is involved with many active circuits and get nervous dealing with wires and different aspects and functions of electrical work. They fear that a simple mistake may leave them with permanent damage or even a deadly accident. It’s always important to use your best judgement and decide if this is a job you can truly get done correctly.

 


Consider the Damage

man working open breaker with panel removedWhen you need to replace the breaker entirely, you must consider if it’s going to be worth it doing it yourself. When you have to fix or replace a breaker, you must consider if you have the tools needed to swap it out.

Let’s say you have never done any electrical work before. How much money are you going to invest in the tools? How many hours of work are you willing to invest in the breaker repair?

Maybe you are familiar with electrical work and do not want to spend any money on hiring an electrician. Will your job be better than a professional’s? Will you achieve the same results as him? Are you willing to risk your safety and life for a repair that can be done by a professional? Why not search “electrician OKC” and let them handle it?

These are costs and things that one must consider about it yourself, as it is going to cost money either if you or an electrician does it.

“Wherever your breaker is, make sure you are working around a dry area, free of any obstacles.”


If You’re Doing it Yourself (DIY)

If you decide to do it yourself, be ready. When you don’t search for “electrician OKC,” you decided to DIY. If so, make sure you have the skills to complete the job without risking any injuries.

In addition, make sure you follow the steps below to avoid a disaster and not miss a step in doing it. You want to make sure that you don’t have a missing wire that can cause more damage than you are already repairing. You want to make sure that you don’t get electrocuted, shocked, fall, or cause injury to those around you. 

Here are the steps to replacing your breaker all by yourself:

1. Locate Your Breaker

Many homes have the breaker box in their garage. Other older homes might have their breaker box on the outside, sometimes on the back of the house. Wherever your breaker is, make sure you are working around a dry area, free of any obstacles.


2. Make Sure It’s Safe – or Contact an “Electrician OKC”

You also want to make sure that the breaker is in workable condition. If the breaker has rust, is damp, or is underwater, make sure it gets dry first! You do not want to work around circuits and have a wet environment.

The most secure way to perform the electrical repair is to keep the breaker off during work. As long as the circuit breaker is off, no currents will flow through. It is only then that you can take the precaution and start the work.

You also want to make sure that the ground is secure and stable. If you trip or fall while you have tools in your hand, it could cause a major injury. Have complete focus and be attentive to avoid a catastrophe, as this work is not to be taken lightly. If there is a moment where you think you are not capable of fixing it yourself, stop what you’re doing and hire a professional. 


tools for breaker repair3. What You’ll Need

Before you begin, make sure you have all of the materials ready. You do not want to start on this project and then leave it halfway to buy materials and leave the breaker and job open, causing a hazard to people.

In addition to this, you also want to double-check your new breaker purchase and see that it is identical to the one you had. (same Model,Version, Size, etc).

Here is a list of the tools that you are going to need: 

  • Rubber Insulated Gloves
  • Rubber Insulated Shoes/Boots
  • Rubber Plastic Handles on Screwdrivers, Pliers, Clippers, etc.
  • Voltage Tester 

4. Test the Breaker

Before you start to get in and replace it, test it for currents. Flip the On/Off switch a couple of times to make sure it’s not having active currents. You can also check for currents by using your voltage tester. If the voltage is low, then there is is no current flowing through the wires.  Using the tester can be very beneficial because it can give you the best results that you need. You must make sure that the breaker is inactive and you will not receive any electrical currents on your end. If there exists currents, you might get in contact with them as they are active. 

5. Replace the Breaker 

Now, you are ready to start the swap. First, start by taking off the panel’s cover. Next, start prying the breaker off of the wall. Then, slowly go around the breaker, placing pressure against the wall all around so the breaker comes off the wall.

Finally, place the new breaker in its place and connect the wires as they were in the previous one. Now, place the cover back on and test run the breaker. 


For a damaged breaker, googling “electrician OKC” might be the solution for you to be worry-free.


Save Your Time! Call the “Electrician OKC” Professionals Today!

If you have followed these steps, you have mastered replacing your own breaker all by yourself! However, when in doubt, get professional help!

It’s much easier for you to sit back, google “electrician OKC” and find the best electrician in Oklahoma City like Passion Electric! Feel free to give us a call at 405-551-8340 and schedule your FREE estimate, or simply click the button below! Let us help you with all of your electrical needs. 

electrician OKC

Should I Change a Breaker Without an Electrician? | Passion Electric – Moore, OK

Back To Top