There are a number of reasons why you may consider updating and rebuilding your home’s electrical system. Perhaps, your home is old, and you are not sure of the safety of its wiring. Or maybe the wiring is not suitable to handle the power demands of the modern family.
Whichever your case may be, there is so much to you can gain by rewiring your home.
However, no matter how much you enjoy fixing things on your own, rewiring is not a project that you can set out to do without professional help. You will need the assistance of a qualified electrician in Norman OK to get the job done.
Below is a rundown of the benefits you can expect by rewiring your home.
Over the last couple of decades, technology has been evolving rapidly. The truth is that some older homes aren’t made to handle the electrical needs of the modern world.
For instance, most homes built before 1960 have a 60-amp service. On the other hand, most homes built more recently have at least 100-amp service.
“Your house should have a service capacity over 100-amp to use modern appliances.”
The problem with the 60-amp service is that it is not optimized for usability and safety.
Therefore, even some insurance companies refuse to insure home with 60-amps service or charge higher premiums to cover them.
It is imperative for you to remember that the electrical needs of your house significantly depend on the number of electrical appliances that you use.
Typically, if your house has less than 100-amp supply, it won’t support modern electrical appliances without worrying about overloading your system.
Therefore, if your home has less than 100-amp service, you should get in touch in with an electrician in OKC for rewiring. By doing this, you will run more appliances efficiently in addition to enjoying a lower cost of insurance.
Several branch circuits conduct electricity in your home. In most cases, modern houses have a minimum of two-240 volts circuits dedicated to heavy-duty appliances and a minimum of sixteen 120-volts circuits for smaller appliances and lighting.
Unfortunately, it is possible to find older homes without 240-volts circuits.
Furthermore, if your home is older, the fuse box or circuit breaker panel that protects your circuit from overload may be worn out, increasing the risk of safety hazards.
Issues such as power outages, buzzing sounds, and frequently tripping wires should warn you of more serious problems. And therefore, it is wise for you to start engaging a qualified electrician in Norman, OK for rewiring.
By replacing the old electrical panels and updating the circuits, you will minimize the risk of electrical problems such as – sparks, overheating, and even fires.
Most modern houses have insulated cables with ground wires. On the other hand, most of the older ones built before 1960 have the knob-and-tube system. This system, in some cases is a safety hazard and not possible to insulate.
Besides, some older buildings have aluminum wiring as opposed to copper wiring. The problem with aluminum wiring is that it deteriorates with time. That means the installation could be posing serious safety hazards.
Therefore, it is wise to get a professional electrician in Oklahoma City to inspect your system and rewire to check if it has worn-out aluminum wiring. This step will ensure that your house remains protected from electric malfunctions and fires.
Overall, it is apparent that if your home is relatively old, then it is wise for you to start thinking about rewiring by a professional electrician in Norman OK.
For All Your Electrical Issues, Call Passion Electric – The Best Electrician in Norman OK!
If you are looking for a reliable electrician in OKC or Norman, OK to help you with rewiring your home, then Passion Electric is your best. Get in touch with us today at 405-551-8340 for more information about our services.
Is Your Home Old? Here’s How Rewiring Helps Handle Your Power Needs| Passion Electric – Oklahoma City, OK